Flake & Quartz Epoxy in Miami
Flake and quartz epoxy systems add colored chips or quartz granules into an epoxy floor, giving garages, pool decks, and commercial spaces a textured, slip-resistant finish. The broadcast layer hides dirt, adds color, and improves grip while keeping the floor easy to clean.
What Flake & Quartz Epoxy Is and How It Works
The system starts with a prepared slab and an epoxy base coat. While the base is wet, vinyl flake or colored quartz is broadcast across the surface, then excess material is removed and a clear topcoat seals everything in. Flake gives a speckled look, while quartz gives a denser, more natural stone-like texture.
Why It Matters in Miami Humidity and Moisture
Texture helps in Miami, where floors often get wet from rain, pool water, and humidity. An ASTM F1869 moisture test is still done before quoting, because moisture vapor from below can lift any coating. If readings call for it, a mitigation layer goes down first, and the topcoat is chosen for wet-area grip and chemical resistance.
Best Uses and Who It Suits
These systems suit garages, workshops, pool decks, patios, locker rooms, kitchens, and light commercial floors. They are a good fit where grip matters, where the floor gets wet, or where a plain solid color would show every mark.
Our 5-Step Process
Step 1: Free on-site inspection and ASTM F1869 moisture test before quoting. Step 2: Diamond grinding to the right surface profile, with no acid-etch shortcuts. Step 3: Moisture mitigation or vapor barrier when needed. Step 4: Application at the correct thickness, including flake or quartz broadcast and clear topcoat. Step 5: Cure and walk-through with clear walk, drive, and load timing.
Maintenance in Plain Terms
Sweep or dust-mop regularly and damp-mop with a mild cleaner. Rinse pool deck areas to remove chlorine and salt residue. Avoid dragging sharp metal, and use mats under heavy equipment. Small chips can be touched up before they spread.
What Affects Cost
Cost depends on size, slab condition, whether moisture mitigation is needed, and the system type, such as partial or full flake, or quartz. Repairs, old coatings, access, and scheduling also affect the final figure, which follows an inspection and moisture test.
Frequently Asked Questions
Are flake floors slippery when wet?
They offer more grip than a smooth coating, especially with a textured topcoat. Grip level can be increased for pool decks and other wet areas.
What is the difference between flake and quartz?
Flake is a vinyl chip that gives a speckled, colorful look. Quartz is a mineral granule that gives a denser, stone-like texture and strong wear resistance.
Can flake be used around a pool?
Yes, when the slab is tested, prepared, and sealed with a suitable topcoat. Grip and chemical resistance matter most in pool areas.
Does flake hide cracks?
It hides minor marks and dirt better than a solid color, but it does not fix structural cracks. Cracks are repaired during preparation where possible.
Related Services
Also see Epoxy Flooring, Metallic Epoxy, and Garage Floor Coatings, or return to the homepage.